Hitachi G 18SR - Technical Specifications

--- 4 ---
Depressed-
center wheels
5. SPECIFICATIONS
80 m/s (15,800 ft/min)
Dimensions
Model
Item
O.D. 180 mm (7")
x Thickness 6 mm (1/4")
x I.D. 22.2 mm (7/8")
O.D. 230 mm (9")
x Thickness 6 mm (1/4")
x I.D. 22.2 mm (7/8")
Max. practical
peripheral speed
Type
G 18SR/G 18SRU G 23SR/G 23SRU
AC single phase 50 or 60 Hz
Power source
Trigger switch
4.3 kg (9.5 lbs.)
7.3 kg (16.1 lbs.)
Corrugated cardboard box
No-load speed
Type of motor
Enclosure
Type of switch
Weight Net: *
1
(Main body)
Gross:
Type of packing
Standard accessories
Depressed-center wheel 180 mm (7")
(Code No. 316824) ...................... 1*
2
Side handle (Code No. 340304) .. 1
Wrench (Code No. 987913Z) ....... 1
Voltage and power input
AC single phase commutator motor
Housing (Black)
Handle (Green)
Gear cover, packing gland ................ Aluminum alloy diecasting
........................ Polyamide resin with glassfiber
Depressed-center wheel 230 mm
(9") (Code No. 316825) ................ 1*
2
Side handle (Code No. 340304) .. 1
Wrench (Code No. 937913Z) ....... 1
Wheet nut (B) (Code No. 937917Z)
..................................................... 1*
2
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Voltage (V) Current (A) Power input (W)
110
230
220
2,000
2,000
2,000
19
9.2
9.6
*
1
Net weight excludes cord, side handle, depressed-center wheel, wheel nut, wheel washer and wheel guard.
*
2
Standard accessories may vary depending on market areas.
Spindle thread
240
2,000
8.8
A, 24, R, B
M14 x 2
8,500/min 6,600/min