Need help?Do you have a question about the Hitachi L19HP03U A and is the answer not in the manual?
General| Screen Size | 19 inches |
|---|---|
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Brightness | 300 cd/m² |
| Contrast Ratio | 800:1 |
| Response Time | 8 ms |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Speakers | 2 x 3W |
| Resolution | 1366 x 768 |
| Viewing Angle | 160° (H) / 160° (V) |
| Input Ports | HDMI, USB, SCART, VGA |
Lists the key capabilities and functionalities of the LCD TV.
Details the items supplied with the television for setup and use.
Briefly thanks the user and guides on proper TV operation.
Specifies required clearance around the TV for proper ventilation.
Provides essential safety instructions for using electrical equipment safely.
Ensures safe operation by detailing power source and cord handling.
Warns against moisture, water, heat, and flames to prevent damage.
Details cleaning, replacement parts, and servicing guidelines.
Provides guidance on environmentally friendly disposal of the TV.
Explains WEEE directive and battery disposal for EU users.
Describes the LCD panel technology and potential pixel variations.
Warns against leaving the TV on unattended when leaving the house.
Details basic controls like Mute, Volume, TV/DTV, and AV/Source.
Explains Menu, navigation buttons, OK/Select, and Cursor keys.
Covers Teletext functions and Electronic Programme Guide access.
Describes numeric keys, Swap, and Info buttons.
Identifies the physical buttons on the front panel of the TV.
Shows the arrangement of various input and output connectors on the back panel.
Details SCART sockets and Component Video Inputs (YPbPr).
Explains PC/YPbPr Audio, SPDIF Out, and RF Input connections.
Describes Audio Line Outs for sound systems and PC Input.
Details connecting High Definition devices via HDMI.
Explains the CI slot for subscriptions and headphone jack.
Details video input for external devices and side audio inputs.
Guides on connecting the TV to the mains power outlet.
Explains how to connect the TV to an aerial or cable source.
Provides instructions for inserting batteries into the remote handset.
Explains how to use the remote control effectively within its range.
Guides on turning the TV on from standby and powering it off.
Explains how to switch between different input sources.
Describes basic operations using the physical buttons on the TV.
Details using the remote for volume and channel selection.
Guides through initial setup: language, country, and antenna.
Performs an automatic scan for digital and analogue channels.
Explains switching between TV and DTV modes.
Shows channel and program information on screen.
Provides program information and scheduling for channels.
Details controls for navigating and viewing program details in EPG.
Explains how to display subtitles for programs.
Details how to access and use digital teletext services.
Refers to the teletext explanation on page 39.
Adjusts the picture aspect ratio for different viewing formats.
Guides on navigating the IDTV (Digital TV) menu system.
Manages channels, including viewing, deleting, renaming, locking.
Covers browsing channels and removing unwanted ones.
Details renaming, locking channels with PIN, and setting favourites.
Guides on adding and removing channels from favourite lists.
Accesses help information and refers to EPG section.
Explains setting timers and configuring conditional access modules.
Accesses the TV's setup menu for various configurations.
Allows adjustment of audio, accessibility, and other system settings.
Configures AC3 Audio and Hard of Hearing features.
Adjusts channel list modes, active antenna power, and scan encryption.
Manages software updates and sets up parental controls.
Sets maturity locks, menu locks, and PIN for parental control.
Configures time settings and audio description preferences.
Enables or disables automatic channel searching in standby mode.
Sets preferred languages for menus, audio, and subtitles.
Manages channel installation, scans, and service lists.
Covers automatic/manual scans and clearing the service list.
Resets TV to factory defaults for initial setup.
Starts the process of automatically scanning for channels.
Manually scans for channels by entering multiplex details.
Deletes all stored channels, prompting for confirmation.
Resets to factory defaults and prompts for channel deletion.
Adjusts picture modes like Cinema, Dynamic, and Natural.
Adjusts the color temperature of the picture display.
Reduces noise in the picture for weak or noisy signals.
Optimizes picture for movies and video games.
Changes the picture's aspect ratio using various zoom modes.
Saves current settings or resets them to factory defaults.
Adjusts audio volume, equalizer presets, and speaker balance.
Configures sound modes, automatic volume limiting, and sound effects.
Sets sleep timer, child lock, and system language.
Adjusts default zoom, background, backlight, and menu timeout.
Selects teletext language and configures external output.
Manages program numbers, band selection, and channel changes.
Configures colour system, sound system, tuning, and channel search.
Saves installation settings and displays the program table.
Sets the color system for TV broadcasts (PAL, SECAM, NTSC).
Displays a table of all programmed channels.
Allows renaming channels and repositioning them in the list.
Removes selected channels from the program list.
Manages automatic channel tuning and programming.
Selects the country for proper channel tuning and broadcast standards.
Adjusts PC image position, phase, dot clock, and picture settings.
Refers to general sections for Sound, Feature, and Source menus.
Displays TV info and controls the mute function.
Selects picture modes and adjusts aspect ratio via zoom.
Details Auto, 16:9, 4:3, Panoramic, 14:9, and Cinema zoom modes.
Zooms the picture with subtitles or for general viewing.
Provides access to teletext information and function buttons.
Details controls for Teletext On/Off, Index, Mix, Expand, Reveal, Hold.
Guides on screen cleaning and avoiding image persistence.
Troubleshooting steps for no power, poor picture, or no sound.
Addresses problems with remote response and input source selection.
Guides on inserting batteries into the remote control handset.
Shows connecting aerial directly, via VCR, or for HD devices.
Details connecting HD devices and VCR/satellite decoders.
Instructs on plugging in the TV and turning it on.
Explains fundamental operations using the remote control.
Initiates the Auto Programming System for initial channel tuning.
Guides through language selection, channel scan, and APS finalization.
To Next Page
