from
receptacle.
Keep
cord from heat,
oil
and sharp
edges.
11.
SECURE
WORK. Use
clamps
or
a vise
to
hold work. It's
safer than
using
your
hand
and it
frees
both hands to operate
tool.
12. DON'T
OVERREACH. Keep proper footing
and balance
at
all times.
13.
MAINTAIN
TOOLS WITH
CARE.
Keep tools sharp and
clean for better
and
safer
performance.
Follow
instructions for lubricating
and
changing
accessories.
Inspect tool
cords
periodically
and
if
damaged, have repaired by
authorized
service
facility.
Inspect extension cords periodically
and
replace if damaged.
Keep
handles dry, clean, and free from oil and grease.
14. DISCONNECT TOOLS. When not in use, before servicing, and when cha-
nging accessories, such as blades, bits, cutters.
15.
REMOVE ADJUSTING KEYS
AND
WRENCHES. Form habit
of
checking
to
see that keys and adjusting wrenches
are
removed from
tool
before turn-
ing it on.
16. AVOID
UNINTENTIONAL
STARTING. Don't
carry plugged-in
tool
with
finger
on
switch. Be
sure switch is
off
when
plugging in.
17.
OUTDOOR
USE EXTENSION
CORDS. When tool is
used outdoors,
use
only extension cords intended
for
use
outdoors and so marked.
18.
STAY ALERT. Watch what you are doing.
Use
commom sense. Do not
operate tool
when
you
are tired.
19. CHECK
DAMAGED
PARTS.
Before
further use
of
the
tool,
a
guard or
other part that is damaged should be carefully
checked
to
determine
that
it
will operate properly and perform
its
intended
function.
Check
for alignment
of moving parts, binding
of moving
parts, breakage
of
parts, mounting,
and
any other conditions that may affect its operation.
A
guard or
other part that
is
damaged
should
be
property
repaired
or
replaced
by
an
authorized service center unless otherwise
indicated elsewhere
in
this
instruction
manual.
Have
defective switches replaced
by
authorized service center.
Do
not use
tool if switch does not turn it on and
off.
20.
AVOID
USING
A POWER TOOL FOR APPLICATIONS OTHER THAN
THOSE
SPECIFIED.
Never use a
power
tool
for
applications other than
those
specified
in
the
instruction
manual.
21.
ENSURE
SAFE
OPERATION
THROUGH
CORRECT
HANDLING.
Secure safe
operation through correct
handling
by
observing
the instructions
described
herein.
2
To Next Page
Loading...
