Hitachi NR83A2 User Manual

*
ALTERNATIVE PARTS --- 3 ---
ITEM
NO.
CODE NO.
DESCRIPTION REMARKS
NO.
USED
PARTS
5 -- 03
NR 83A2
52 880-081 WASHER 1
53 949-657 HEX. SOCKET HD. BOLT M6X12 (10 PCS.) 3
54 875-643 PLUNGER SPRING 1
55 874-436 O-RING (P-4) 1
56 884-113 PLUNGER (A) 1
57 884-111 VALVE BUSHING 1
58 884-112 O-RING (I.D 10.7) 2
59 876-203 TRIGGER 1
60 872-645 O-RING (P-9) 2
61 878-734 VALVE PACKING 1
62 875-645 URETHANE BALL (C) D7.14 1
63 875-638 O-RING (S-12) 1
64 875-644 VALVE PLATE 1
65 877-335 TRIGGER VALVE BUSHING 1
66 878-121 TRIGGER PLUNGER 1
67 874-820 PLUNGER O-RING 1
68 949-866 ROLL PIN D3X30 (10 PCS.) 1
69 884-116 VALVE SLEEVE (A) 1
70 876-316 O-RING (S-7) 1
71 878-723 PLUNGER O-RING 1
72 949-424 WASHER M5 (10 PCS.) 1
73 884-115 PLUNGER (B) SPRING 1
74 884-114 PLUNGER (B) 1
75 877-393Z NAIL FEEDER 1
76 878-422 RIBBON SPRING 1
77 878-418 NEEDLE ROLLER 1
78 876-465 NYLON NUT M4 1
79 949-453 SPRING WASHER M4 (10 PCS.) 1
80 877-371 NYLON NUT M5 1
81 949-454 SPRING WASHER M5 (10 PCS.) 1
82 884-065 MAGAZINE 1
83 876-550 SLEEVE 1
84 949-824 HEX. SOCKET HD. BOLT M5X45 (10 PCS.) 1
85 949-650 HEX. SOCKET HD. BOLT M4X15 (10 PCS.) 1
86 877-402 WASHER 1
87 877-396Z STOP LEVER 1
88 877-398 COLLAR 1
89 877-397 STOPPER SPRING 1

Hitachi NR83A2 Specifications

General

Operating Pressure	70-120 PSI
Magazine Angle	21 degrees
Nail Length	2 inches to 3-1/4 inches
Firing Mode	Sequential / Contact
Fastener Type	Round Head