Hitachi NR83A2 S1 User Manual

Model
Modèle
Modelo
NR 83A2 (Y)
NR83A2 (S1)
DANGER
Improper use of this Nailer can result in death or serious injury!
This Manual contains important information about product safety.
Read and understand this Manual before operating the Nailer.
Never allow anyone who has not reviewed this manual.
Nailer
Cloueur
Clavador
PELIGRO
¡La utilización inadecuada e insegura de este clavador puede resultar en lesiones serias o en la
muerte!
Este manual contiene información importante sobre la seguridad del producto.
Lea y entienda este manual antes de utilizar el martillo neumático.
No deje manejar esta herramienta a nadie que no haya leído este manual.
Instruction and safety manual
Manuel d'instructions et de sécurité
Instrucciones y manual de seguridad
DANGER
Une utilisation incorrecte et sans respecter la sécurité de ce cloueur risque d’entraîner la mort
ou des blessures graves !
Ce manuel renferme des instructions importantes sur la sécurité de l’outil.
Lire et bien assimiler ce manuel avant d’utiliser le cloueur.
Ne jamais laisser les personnes n'ayant pas étutdié le manuel utiliser l'outil.
NR83A2 (Y)
(with depth adjustment)
NR83A2 (S1)
(without depth adjustment)
01Eng_nr83a2(01_17)e.p65 12/24/10, 15:371

Hitachi NR83A2 S1 Specifications

General

Type	Framing Nailer
Operating Pressure	70-120 psi
Magazine Angle	21 degrees
Firing Mode	Contact or Sequential
Power Source	Pneumatic
Nail Diameter	0.113 to 0.131 inches
Nail Length	2 to 3-1/4 inches
Magazine Capacity	64-70 nails

Summary

IMPORTANT SAFETY INFORMATION

DEFINITIONS OF SIGNAL WORDS

Defines hazard signal words like DANGER, WARNING, CAUTION, and NOTE used in the manual.

NAILING ACTION EXPLANATION

Details the two mechanisms for driving nails: Single Sequential and Contact Actuation.

SAFETY GUIDELINES AND WARNINGS

USING NAILERS SAFELY

Provides critical instructions on wearing safety gear, handling the tool, and pressure limits.

CONTINUED SAFETY PRECAUTIONS

OPERATIONAL HAZARDS AND SAFE PRACTICES

Addresses risks like accidental firing, improper use of couplers, and securing parts.

EMPLOYER'S RESPONSIBILITIES

OPERATION AND COMPONENTS

NAILER PARTS IDENTIFICATION

Identifies key components of the nailer through illustrations and labels.

TECHNICAL SPECIFICATIONS AND NAIL SELECTION

STANDARD ACCESSORIES INCLUDED

OPTIONAL ACCESSORIES AND APPLICATIONS

PRE-OPERATION SETUP AND AIR SUPPLY

WORKING ENVIRONMENT AND AIR SUPPLY

Ensures a safe workspace and details air source, filter, regulator, and hose specifications.

AIR CONSUMPTION AND LUBRICATION GUIDELINES

NAILER TESTING AND COLD WEATHER CARE

NAILER TESTING PROCEDURES AND ADJUSTMENTS

ADJUSTING AIR PRESSURE

Explains how to set the correct air pressure for optimal nail penetration and tool longevity.

LOADING THE NAILER

INTRODUCTION TO NAILER OPERATION

METHODS OF NAILING OPERATION

SINGLE SEQUENTIAL ACTUATION

Details the procedure for single-nail firing using the trigger and push lever for precision.

CONTINUOUS OPERATION (PUSH LEVER FIRE)

POST-OPERATION PROCEDURES AND SAFETY NOTES

Provides essential safety tips and steps to follow after completing nailing work, including disconnection and cleaning.

ADJUSTING NAILING DEPTH

MAINTENANCE AND INSPECTION PROCEDURES

SERVICE AND REPAIRS GUIDELINES

Guidelines for authorized repair, modification, and the importance of using genuine parts.

MAINTENANCE SCHEDULE AND ACTIONS

OPERATOR TROUBLESHOOTING AND CORRECTIONS

PARTS LIST AND DIAGRAM OVERVIEW

DETAILED PARTS LISTING

Provides a comprehensive list of all replaceable parts with item numbers, codes, and descriptions.

STANDARD ACCESSORIES LIST

OPTIONAL ACCESSORIES LIST