5. Function Menu Screen Display
14
A16381H9HL
5.1 Simple Timer Setting
This function is used to start or stop the unit operation at the set time.
The timer operation contents can be set from "Not Used", "Once", or "Everyday".
NOTES:
•
"Once" timer program has been executed.
•
Do not set the same time for both ON/OFF timers.
•
Scheduled operation (stop) is not possible while the remote control is prohibited.
•
When is displayed, scheduled operation (stop) is not available.
•
Refer to "6.1 Adjusting Date/Time" to set the date and time.
1. Set the simple timer.
Step1. Select "Simple Timer" on the "Function Menu" screen and
press "OK".
When the current time has not been set yet, the "Adjusting
Date/Time" setting screen is displayed.
Step2. Press " " or " " to select the item to be set:
"Execute"
↔
"ON Time"
↔
"OFF Time"
↔
" ".
Step3. Press " " or " " to set each item.
screen returns to the "Function Menu" screen.
•
When "Execute" is selected,
press " " or " " to switch the setting items as follows:
"Not Used"
↔
"Once"
↔
"Everyday"
.
•
When "ON Time" or "OFF Time" is selected, the setting
time can be adjusted in 30-minute increments by
pressing " " or " ".
•
When " "
screen is displayed.
If you select "Yes", the simple timer settings are
discarded and the screen returns to Step2.
If you select "Cancel", the screen still returns to Step2.
Function Menu
Power Saving/Night Quiet Schedule
Power Savings Setting
Night Quiet Operation
Operation Schedule
Simple Timer
OK
Select Back
(Mon) 16:30
Simple Timer
Everyday
Execute
08:00
ON Time
18:00
OFF Time
(Mon) 16:30
BackOK Select
Simple Timer
Once
Execute
08:30
ON Time
17:30
OFF Time
(Mon) 16:30
BackOK Select
Back
OK
Select
Simple Timer
(Mon) 16:30
Reset the Simple Timer Setting?
Yes Cancel
To Next Page
Loading...
