5. Function Menu Screen Display
28
A16381H9HL
5.7 Autoboost Setting
The function is used to provide powerful cooling and heating for 30 minutes once the operation starts.
This function is only available when the operation mode is Cool or Heat.
Whenever the unit is turned on, the system operates in the Autoboost mode for 30 minutes.
NOTES:
•
The Autoboost function is available only on selected outdoor units. If the system does not support this
function, Autoboost cannot be set.
•
Autoboost cannot be used if Power Savings is not supported.
•
When this function is activated while mode is "Cool", fan speed changes and is locked in "Auto" fan speed
for approximately 30 minutes regardless of the current setting. While in this operation (fan speed "Auto"),
fan level may reduce when the room temperature gets close to the setting temperature. The operation starts
regardless of the fan speed.
1. Set the autoboost
Step1. Select "Autoboost" on the "Function Menu" screen and
press "OK".
Step2. Press " " or " "
，
the selected items changes as follows:
"Not Set"
↔
"Cool"
↔
"Heat"
↔
"Cool + Heat".
settings.
Press " " to return to the "Function Menu" screen.
Power Consumption Display
Autoboost
Comfort Setting
Motion Sensor Setting
Setback Setting
Function Menu
OK
Select Back
(Mon) 16:30
Autoboost
Cool
Heat
Cool + Heat
Not Set
OK
Select Back
To Next Page
Loading...
