To Next PageTo Next Page
Need help?Do you have a question about the Hitachi PSC-5S and is the answer not in the manual?
General| Model | PSC-5S |
|---|---|
| Manufacturer | Hitachi |
| Input Voltage | 100-240 VAC |
| Frequency | 50/60 Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
Immediate hazard leading to severe injury or death.
Hazards or unsafe practices leading to severe personal injury or death.
Hazards or unsafe practices leading to minor personal injury or damage.
Choosing a suitable location for controller installation.
Details on packing contents before starting installation.
Specifies minimum distance between central stations.
Instructions for physically installing components.
Shows connections between central stations, indoor/outdoor units.
Setting up address configurations using DIP switches.
How to set up control for single indoor units.
How to set up control for multiple indoor units as a group.
Steps to assign a master unit within a group.
Steps to assign slave units within a group.
Overview of input/output functions and connector settings.
Procedure for configuring external demand input signals.
Process to enter the mode for setting optional functions.
Process to initiate the self-check routine.
Steps to reset or initialize the central station.
Explanations of symbols and text on the display.
Description of buttons and their operations.
Navigating groups and checking their operational status.
Configuring COOL, HEAT, DRY, or FAN modes.
Setting temperature, fan speed, and louver angle.
How to turn units on and off.
Preventing operation via remote control.
Enabling or disabling scheduled operations.
Interpretation of non-standard indicators like EMERGENCY.
Understanding error codes and fault indicators.
