Functions of the Control Panel
The Control Panel is a touch panel made of glass.
If you touch button, the current settings will be displayed.
The upper portion of the Control Panel is the display and the lower portion is for operation.
Touch the lower portion of the Control Panel to change the settings, if necessary.
Providing information
Setting Energy Saving mode
Adjusting temperature settings
Setting an ice-making Setting a cooling mode
Setting the Vacuum Compartment
Auto Door
Display area For operation
Water
It will turn on while it is working in
“
eco
”
mode.
Pg.55
It will turn on while setting the Auto Door.
Pg.53
It will turn on while the Control Panel is locked.
Pg.54
Blink indicating any trouble.
Pg.64
It will turn on when water in the water supply container is getting low.
Pg.51
Set Energy Saving mode.
Energy-saving by reducing
cooling power of each
compartment.
Set temperature for each
compartment.
Normally, use the
“
Mid.
”
setting.
Set the ice making
mode
Set a cooling mode Set the Vacuum
Compartment mode.
“
Trip
”
（旅行）
Pg.54
“
Save
”
（節電）
Pg.54
Refrigerator
Compartment
Pg.45
Freezer Compartment
Pg.49
“
Quick
”
（急速製冰）
Pg.51
“
Normal
”
（製冰）
Pg.50
“
Off
”
（製冰停止）
Pg.51
“
Quick Cool
”
（急冷藏）
Pg.45
“
Quick Freeze
”
（急冷凍）
Pg.49
“
Vegetable
”
（蔬果室強）
Pg.52
“
Subzero
”
（
-1˚C
）
Pg.47
“
Chiller
”
（
+1˚C
）
Pg.47
All lamps off
Pg.47
■ About the display
● Close all the doors before adjusting the settings. While a door of the refrigerator is opened or an indicator lamp on the display is blinking, it will not
work even if you touch the Control Panel.
● For checking the settings, please touch
button. Once all the indicator lamps turn on, and then the current setting will be displayed. For energy
saving, indicator lamps on the display and operation portions will be turned off 2 minutes after the operation. However, indicator lamps such as
“
Quick
Freeze
”
,
“
Quick Cool
”
,
“
Save
”
,
“
Trip
”
,
“
Quick
”
,
“
Off
”
,
“
Water
”
and
“
eco operation
”
will not be turned off.
● When opening the refrigerator do
or, the displayed characters become lit. They become unlit about 15 seconds after closing it.
■ About the Control Panel
● Response of the touch panel may change depending on the surrounding temperature, humidity, physical condition of the user or operation status of
the adjoining electric product.
● Release a finger and touch the panel again if the panel does not respond after touching it. False detec
tion may occur (it may be kept pressed) if the
time interval between key touches is too short. Response of the touch panel does not improve even if you touch it strongly.
● The panel may not respond if it is wet or dirty. Wipe it off with a dry cloth.
Notice
First touch it.
Learn Name & Function of Each Part
※
All the indicator lamps are lit for the sake of explanation.
To Next Page
Loading...
Need help?
General
