9
Connect to the smartphone
Set the unit pairing mode
Operate the settings of the smartphone
When the screen on the right is displayed on the application, move to the Wi-Fi setting screen of the smartphone and select
・
the Wi-Fi setting and then turn it on again.
“ R-WB_ ＊＊＊＊＊＊”.
The message “Network not connected” may be displayed, but proceed as it is.
6
1
7
2
Press
1,2 Second
and
set the unit paring mode.
Select “R-WB_＊＊＊＊＊＊(＊is alphabet or number) in the Wi-Fi setting.
・
It may take a while for “R-WB_＊＊＊＊＊＊” to be displayed. If it does not appear, redisplay the Wi-Fi setting on the smartphone or turn off
Operate the refrigerator
Press
1,2 Second
and
Press and hold and for at least 2 seconds until the “Peep!” sounds to blink .
unit cancel paring mode.
Set the wireless LAN function as “ Yes ”
Touch and hold “ Energy Saving ” for at least 2 seconds until the setting sound (Peep) sounds to light “ WLAN ”.
Operate the refrigerator
5
Press
1,2 Second
WLAN lamp light is on.
Pi!
2 second together for 2 second together for set the
Select “ R-WB_ ＊＊＊＊＊＊”.
Tap “Next” and
proceed the next
screen
R-WB_ ＊＊＊＊＊＊R-WB640V0MSX
Model Network
To Next Page
Loading...
Need help?
General
