EasyManua.ls Logo

Hitachi RA-08JF2 - POWER SOURCE REQUIREMENTS; REMOVING THE FRONT COVER

Hitachi RA-08JF2
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 10 –
POWER SOURCE
Check the capacity of wiring and power outlet. The power outlet should be used exclusively
for the air conditioner. Do not use it with other appliances. Any wiring must follow the
national wiring regulation.
Ground the air conditioner to prevent danger of electric shock.
Connect the air conditioner with power source securely.
Use a fuse as below:
Voltage rating 50Hz 220-240V
Operatable
50Hz 198-264V
Voltage range
CAUTION
WARNINGTHIS APPLIANCE MUST BE EARTHED.
REMOVE THE FRONT COVER
Remove the front cover in the following manner.
1 Pull the suction grille at both bottom corner
and release it.
2 Remove the air filter.
3 Remove two screws which secure the front
cover.
4 Remove the front cover from lower side.
15A time delay fuse
RA-08JF2
RA-10JF2
RA08/10JF2-EN 29/09/2006, 10:03 am10

Related product manuals