TIMER RESERVATION
■ ON Timer and OFF Timer are available.
1
OFF TIME setting
● Select the OFF TIME by pressing the (OFF)
Button.
● Setting time will change according to the below
sequence when you press the button.
● The value change more quickly if you keep pressing
the button.
OFF Timer Reservation
■ Operation stop at setting time
2
Press the (Reserve) button
● OFF TIMER reserved with a signal received sound
“beep”.
● The (OFF) Mark starts lighting instead of blinding.
1
ON TIME setting
● Select the ON TIMER by pressing the (ON)
Button.
● At the beginning of setting, time 6 hours was set.
● Setting time will change according to the below
sequence.
● The value change more quickly if you keep pressing
the button.
ON Timer Reservation
1
Press the (Cancel) button
● As the time settings are stored in remote controller
memory, you only have to press the (Reserve)
button in order to use the same setting next time.
CANCELLATION of Timer Reservation
2
Press the (Reserve) button
● ON TIMER reserved with a signal received sound
“beep”.
● The (ON) Mark starts lighting instead of blinding.
■ Operation will start for setting
temperature at setting time (The starting
time may different depend on the room
temperature and set temperature).
0.5 1.0 1.5 9.5 10 11 12
0.5 hour interval 1 hour interval
0.5 1.0 1.5 9.5 10 11 12
0.5 hour interval 1 hour interval
– 13 –
To Next Page
Loading...
Need help?
General
