MANUAL OPERATION [Heating
●
Dehumidify
●
Cooling]
■ Please use under below condition when you want to set the function mode, room temperature and
fan speed by manually.
1
OPERATION MODE SELECTION
● Every time you press the button, the mode will change as the below
sequence
(Auto) [ (Heat) [ (Dehumidify) [ (Cool)
2
ROOM TEMPERATURE SETTING
Up
Down
● The cooling operation does not start if the
temperature setting is higher than the current
room temperature.
3
FAN SPEED SETTING
● Every time you press the button, fan speed will change as the
below sequence.
● HEATING & COOLING
CIRCULATION
● DEHUMIDIFY : QUIET (FIXED)
4
Press the (START/STOP) button
● Operation start with a signal received sound “beep”.
Press the (START/STOP) button
● As the settings are stored in memory in the remote control unit, you
only have to press the (Start/Stop) button next time.
HEATING
Outdoor Temperature
21°C below
DEHUMIDIFYING
Room Temperature
16°C above
COOLING
Outdoor Temperature
22-42°C
Heating 18~20°C
Dehumidify 16~26°C
Cooling 25~28°C
■ Recommend Temperature
}
: AUTO [ HIGH [ LOW [ QUIET
▲ ▲
STOP
– 12 –
To Next Page
Loading...
Need help?
General
