t
t
t
t
t
Press the (POWERFUL) button during operation.
t
CANCEL
START
Press the (POWERFUL) button again.
t
L.H
L.H
L.H
“ ” is displayed on the LCD.
POWERFUL OPERATION
NOTE
During POWERFUL operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
–
After auto restart, POWERFUL operation is cancelled and previous operation shall start.
1
2
By pressing (POWERFUL) button during AUTO, HEATING, DEHUMIDIFYING, COOLING or FAN
operation, the air conditioner performs at maximum power.
During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING or
HEATING operation respectively.
POWERFUL operation ends in 20 minutes. Then the system
automatically operates with the previous settings used before
POWERFUL operation.
When ECO mode, or LEAVE HOME mode is selected, POWERFUL operation is cancelled.
just before defrost operation (when the air conditioner is running in HEATING operation).
“ ” disappears from the LCD.
on
– 4 –
Prevent the room temperature from falling too much by setting temperature at 10 deg automatically when no
one is at home.
LEAVE HOME(LH) OPERATION
NOTE
● During Leave Home operation, fan speed and horizontal air deflector position cannot be changed.
L.H
CANCEL
START
t
t
Room temperature is automatically set at 10 deg.
Press the (STOP) button.
Change to other Operation Mode.
“ ”,“ LH ”,“ ”,“ ”, is displayed on the LCD.
Hold down the HEATING Button for 3-5 seconds to start
Leave Home operation.
ENGLISH
– 5 –
To Next Page
Loading...
