FIXTURE SCREW
FIXTURE SCREW
Removing the indicating P.W.B.
the control P.W.B.
2. Remove the upper hook from the indicating
P.W.B. lock resin, pull the P.W.B. forward a
little and remove it.
Removing electrical parts
1. Remove the electrical parts cover.
2. Remove the connectors from the CN4 (heat exchange
thermistor), CN15 (stepping motor) and CN2 (fan motor).
3. Remove t lock screws.
Removing control P.W.B.
1. Remove the connectors from the CN3.
2. Remove the P.W.B. from the P.W.B. support.
STRUCTURE OF AN INDOOR UNIT ELECTRIC PARTS
RAK-18/25/35/50PEB
CN16
FIXTURE SCREW
hree
ELECTRICA L. COVER
RAK-25/35/50PEBC
To Next Page
Loading...
