Prevent the room temperature from falling too much by setting temperature at 10 deg automatically when no
one is at home.
LEAVE HOME(LH) OPERATION
NOTE
● During Leave Home operation, fan speed and horizontal air deflector position cannot be changed.
L.H
CANCEL
START
t
t
Room temperature is automatically set at 10 deg.
Press the (STOP) button.
Change to other Operation Mode.
“ ”,“ LH ”,“ ”,“ ”, is displayed on the LCD.
Hold down the HEATING Button for 3-5 seconds to start
Leave Home operation.
ENGLISH
– 5 –
To Next Page
Loading...
