– 94 –
LD301 blinks 9 time.
Communication error.
Is DC 35V being output at
terminals C and D? (Normally,
DC 32.5-38.5V is output.)
Ye s
Interface relay
Coil terminal
Contact terminal
Is DC 35V being output across R713?
Is DC 12V being supplied across
the control side (coil terminal) of
interface relay?
Is a voltage (at least 10V) being
generated between the contact
terminals of interface relay?
Check the interface curcuit.
Ye s
Ye s
No
No
Ye s
D707 and C710 may be defective.
There is a defective section between the
12V output of switching power supply on
the main P.W.B. and interface relay (also,
check for contact with solder, etc.).
Repalce the interface relay.
No
To Next Page
Loading...
