INDOOR UNIT INDICATORS
TEMPORARY SWITCH
Use this switch to start and stop when the remote controller does not work. [Use non-conductor stick
(example toothpick)]
● By pressing the temporary switch, the operation is done in automatic operation mode.
● When the operation is done using the temporary switch after the power source is turned off and turn
on again, the operation is done in automatic mode.
OPERATION INDICATOR
OPERATION LED
This LED lights during operation.
The OPERATION LED fl ashes/dimming in the following cases
during heating.
(1) 1) Duri preheating
For about 2–3 minutes after starting up.
(2) 2) Duri defrosting
Defrosting is performed about once every one hour
when frost forms on the heat exchanger of the outdoor
unit, for 5–10 minutes each time.
TIMER LED
This LED lights up when the timer is working.
FROST WASH LED
This LED lights when the Frost Wash function is in operation. If
the auto Frost Wash
function is canceled and operation is
stopped, when the device is
operated for a total of about
42
hours, the Frost Wash LED blinks
to indicate that it is time
to operate the manual Frost Wash function.
(not applicable for Multi split connection)
- 1
5
-
MODEL RAS-EH24RHLAE
To Next Page
Loading...
