– 10 –
PM
PM
AM
PM
HOW TO SET THE TIMER
The device will turn on (off) and off ●
(on) at the designated times.
The switching occurs fi rst at the ●
preset time that comes earlier.
The arrow mark appearing on the ●
display indicates the sequence of
switching operations.
1 Press the (ON-OFF)
button so that the
(OFF)
mark blinks.
You can set the device to turn off at the
preset time.
After you change the
batteries;
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the (CANCEL) button.
The (RESERVED) sign goes out with a beep and the (TIMER) lamp turns off on the indoor unit.
1 Set the (TIME) button.
1 Press the (OFF-TIMER)
button. The
(OFF) mark blinks on
the display.
2 Set the turn-off time
with the TIMER control
button.
Press the
(RESERVE)
button.
3 Press the (ON-
TIMER) button so that the
(OFF) mark lights and
the
(ON) mark blinks.
NOTE
You can set only one of the OFF-timer,
ON-timer and ON/OFF-timer.
The device will turn on at the ●
designated times.
TIME
OFF TIMER
ON TIMER
RESERVE
CANCEL
AM
PM
AM
AM
1 Press the (ON-TIMER)
button the
(ON) mark blinks
on the display.
Start
Start
Start
Stop
Stop
STOP
Time
OFF-Timer
ON-Timer
ON/OFF Timer
To Next Page
Loading...
