Hitachi RAK-25REF Service Manual

3. Press (TEMPERATURE) button of the remote control and set the room temperature on the remote control to 16℃.
4. Hold down press (TEMPERATURE) button for about 2 seconds,then press the (ON/OFF) button.
5. Transmission sign lights up with beep from indoor unit simultaneously and the error code will be removed.
<HOW TO REMOVE ERROR CODE>
1. Read history error code.
2. Press (MODE) button on the remote control to set it to mode.
ERROR CODE INFO MATION
<HOW TO DISPLAY ERROR CODE>
1. Set the remote to “OFF”.
2. Press (MODE) button on the remote control to set it to mode.
3. Press (TEMPERATURE) button of the remote control and set the room temperature on the remote control to 32℃.
4. Hold down press (TEMPERATURE) button for about 2 seconds,then press the (ON/OFF) button.
5. Transmission sign lights up with beep from indoor unit simultaneously and the error code will be displayed.
6. Use the wind speed button to set the fan speed according to the required fault information (See the table below).
R
Auto
High
Med
Low
Silent
Newest
Error code
Error code setting for fan speed
Fan speed
Second newest
Third newest
Fourth newest
Oldest
61

Hitachi RAK-25REF Specifications

General

Brand	Hitachi
Model	RAK-25REF
Category	Air Conditioner
Language	English