– 14 –
ECO OPERATION
ECO operation is an energy saving function by changing set temperature automatically and by limiting the
maximum power consumption value.
NOTE
z
ECO function will not be effective when power consumption is low.
z
By pressing (POWERFUL) button, ECO operation is cancelled.
z
After auto restart, ECO operation is cancelled and previous operation mode shall start.
z
For multi model connections, energy saving operation shall only start by changing set temperature
higher or lower automatically. However, effectiveness of ECO depends on operation conditions.
z
By pressing the
(ECO) button during AUTO, HEATING,
DEHUMIDIFYING or COOLING operation, the air conditioner
performs the "ECO" operation.
To start ECO operation
To cancel ECO operation
z
Press (ECO) button during operation.
“
” is displayed on the LCD.
Energy saving operation will start by changing the set
temperature higher or lower automatically and reducing operation
power consumption. This function may vary based on the
connected outdoor unit.
z
Press
(START/STOP) button. Or
z
Press
(ECO) button again.
“
” disappears from the LCD.
To Next Page
Loading...
