CONTROL AND FUNCTION
25
9
FAN SPEED SETTING IN THERMO OFF IN COOLING
The fan speed in Cooling Mode during thermo off can be changed by the remote controller.
(This procedure shall be implemented strictly by service personnel only.)
It is possible to return it to the default setting.
Press [POWERFUL] button and [TIME 䌻㻔㼁㻼㻕㼉㻌㼎㼡㼠㼠㼛㼚㻌㼟㼕㼙㼡㼘㼠㼍㼚㼑㼛㼡㼟㼘㼥㻌㼒㼛㼞㻌㼍㼎㼛㼡㼠㻌㻡㻌㼟㼑㼏㼛㼚㼐㼟㻌㼣㼔㼑㼚㻌㼠㼔㼑㻌㼞㼑㼙㼛㼠㼑㻌
controller is OFF.
Beep sound pattern : 1) Default setting : Short beep
2) Changed setting : Double beep
Fan speed during thermo off
Default Setting Ultra low
Changed Setting Set fan speed (When auto fan speed is set, the fan speed is low)
NOTE :
(1) The selected fan speed will remain unchanged after the unit is turned off.
(2) If Timer reservation has been set, it will be canceled.
(3) During time setting and timer setting, this operation cannot be set.
Transmission sign lights up with beep from indoor unit simultaneously.
To Next Page
Loading...
