Hitachi RAS-10C9G - Circulation Operation; Activating Circulation Mode; Setting Fan Speed and Temperature; Starting and Stopping Circulation

– 10 –
CIRCULATION OPERATION
Press the button so that the display indicates
(CIRCULATE)..
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
Press the temperature control button to set to the desired
temperature.
■ As the settings are stored in memory in the remote controller,
you only have to press the
(CIRCULATION) button next time.
2
1
3
Press the (CIRCULATION) button. Circulating operation
starts with a beep. Press the
(STOP) button to stop
operation.
STOP