To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RAS-12FSXNSE and is the answer not in the manual?
General| Type | Heat Pump |
|---|---|
| Cooling Capacity | 3.5 kW |
| Heating Capacity | 4.0 kW |
| Refrigerant | R410A |
| Indoor Unit Dimensions (W x H x D) | 800 x 295 x 223 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 285 mm |
| Weight (Indoor Unit) | 9.5 kg |
| Cooling Capacity (BTU) | 12000 BTU |
| Heating Capacity (BTU) | 13600 BTU |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Noise Level | 50 dB(A) |
Explanation of safety symbols and their importance for user and unit safety during installation and operation.
Important safety advice regarding installation, operation, and potential hazards.
Guidelines for safely transporting the outdoor unit, including packing and lifting precautions.
Guidelines for selecting an appropriate and safe location for outdoor unit installation.
Diagrams and instructions for connecting refrigerant pipes to each outdoor unit.
Steps for conducting an air-tight test to ensure system integrity before refrigerant charging.
Methods for vacuuming the refrigerant circuit to remove moisture and air.
Instructions for charging additional refrigerant, including safety and insulation measures.
Procedure for setting the refrigerant cycle number using DIP switches.
Configuration of DSW4 for test runs, service functions, and external inputs/outputs.
Essential checks to perform before commissioning, including unit connections, settings, and electrical safety.
Steps to follow for executing the test run of the air conditioning system.
Detailed instructions for conducting the test run using the PC-ARFPE remote control.
