To Next PageTo Next Page
Need help?Do you have a question about the Hitachi RAS Series and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (EER) | Varies by model |
| Coefficient of Performance (COP) | Varies by model |
| SEER | Varies by model (e.g., RAS-10JH1: 6.1, RAS-14JH1: 6.1) |
| SCOP | Varies by model (e.g., RAS-10JH1: 4.0, RAS-14JH1: 4.0) |
General safety precautions and warnings related to product handling and disposal.
Guidance on correctly filling out the F-Gas label with refrigerant details.
Explains how to identify and understand model codes and their abbreviations.
Basic information about the manual, product updates, and manufacturer policies.
Important safety guidelines and precautions to prevent hazards during operation.
Information on correct refrigerant usage and potential issues with incorrect types.
Procedures for pre-operation checks, component handling, and installation basics.
Identification and listing of various parts of the outdoor unit models.
Specifies minimum clearances, site conditions, and distances for proper installation.
Instructions for connecting refrigerant piping and selecting correct pipe sizes.
Details on shut-off valve operation and specific piping for heat recovery systems.
Procedures and safety precautions for charging refrigerant and calculating amounts.
Instructions for drain piping and general electrical wiring safety precautions.
Power supply connections, cable specs, and EMC information.
Detailed instructions for setting various DSW switches on the outdoor unit PCBs.
Specific wiring details for connecting power and control cables to outdoor units.
Procedures for performing pre-checks and initial start-up of the air conditioning system.
Overview of the primary safety features and devices integrated into the system.
