Hitachi RAS-32CNH2 - SLEEP TIMER EXPLANATION; SLEEP TIMER OPERATION DETAILS

– 11 –
ENGLISH
Cooling
“ ”
and
dehumidifying
“ ”
Explanation of the sleep timer
The device will control the FAN SPEED and room temperature automatically
so as to be quiet and good for people’s health.
You can set the sleep timer to turn off after 1, 2, 3 or 7 hours. The FAN
SPEED and room temperature will be controlled as shown below.
Function Operation
The settings of room temperature and circulation are not varied.
The FAN SPEED will be set to
LOW immediately.
Fan
“ ”
Heating
“ ”
The room temperature will be
controlled 5°C below the
temperature setting 30 minutes
after the setting of the sleep
timer. The FAN SPEED will be
set to LOW immediately.
Operation with the sleep timer
The room temperature is kept
at about 12°C minimum.
The room temperature is kept
at about 25–28°C.
Sleep timer set
30 minutes later
1 hour later
3 hours later
7 hours
later
2 hours
later
5°C
Sleep
timer set
30 minutes later
3 hours later
7 hours later
2 hours
later
6 hours
later
32CNH2 EN2 3/25/05, 2:3311