– 9 –
ENGLISH
CIRCULATION OPERATION
■ Circulation Function
● During circulation operation, compressor does not run and there is no cooling operation with only indoor
fan running.
● When the setting temperature is higher than room temperature, indoor fan will stop running.
Press the button so that the display indicates
(CIRCULATE).
Circulating operation starts with a beep.
Press the FAN SPEED button and select the desired FAN
SPEED (the display indicates your choice).
Press the temperature control button to set to the desired
temperature.
■ As the settings are stored in memory in the remote controller,
you only have to press the
(CIRCULATION) button next time.
3
Press the button to stop operation.
STOP
1
2
RAS-S10CDT-S13CDT (EN1) 9RAS-S10CDT-S13CDT (EN1) 9 1/4/14 10:34 AM1/4/14 10:34 AM
To Next Page
Loading...
