Hitachi RCI-3.0FSN3 - 1 GENERAL INFORMATION; 1.1 GENERAL NOTES; 1.2 PRODUCT GUIDE; 1.2.1 Prior check

TC-12001
3-29
4-WAY CASSETTE
P5414964-rev.1
11
(5) Press “ ” or “ ” and select “If absent”.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
ENT. RTN.SEL. ADJ
OK
OK
(6) The display is switched “Running”,
“Stand-by” and “Stop” in order by pressing
“ ” or “ ” and change the setting.
If other settings are not required, move to
procedure (9).
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
ENT. RTN.SEL. ADJ
OK
OK
(7) Press “ ” or “ ” and select “Check interval”.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
ENT. RTN.SEL. ADJ
OK
OK
(8) The display is switched “30MIN”, “60MIN”,
“90MIN”, “120MIN” and “180MIN” in order by
pressing “ ” or “ ” and change the setting.
If other settings are not required, move to
procedure (9).
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
ENT. RTN.SEL. ADJ
OK
OK
(9) Press “OK” after the setting is completed.
The conrmation screen will be displayed.
Select “Yes” by pressing “ ” or “ ” and
press “OK”. The motion sensor setting will
be conrmed and the screen will return to the
normal mode (operation mode indication).
A/C
LOUV.
Motion Sensor is activated
LOUV. ADJ
MODE SPEED
HEAT
MED
TEMP
Meeting Room
OK
Save changes?
Motion Sensor Setting
Yes No
SEL. ENT. RTN.
OK
OK
OK