P5414964-rev.1
19
Trouble Action before Contact
The protection devices (fuse, breaker, ELB, etc) are
frequently activated or the main power source switch
does not work.
Turn OFF the power source.
Water Leakage from Indoor Unit. Stop the operation.
l
The RUN indicator (Red) is ashing.
l
The indoor unit number, the alarm code, the model
code, *model name (Ex. RCI-3.0FSN3) and the
connected number of indoor units are displayed on
LCD.
(*The unit model name is only displayed for the
corresponding unit model.)
l
In case that the plural indoor units are connected to
one remote control switch, the above abnormality
informations for each indoor unit are displayed one
by one.
Check the details on LCD and contact your distributor.
Refer the alarm code table.
Contact your distributor and inform the indication detail
on the remote control switch.
Inform the following items to a distributor.
1) Unit Model
2) Content of Trouble
3) Alarm Code No. on LCD
10.3 Contact Distributor
If the trouble still remains even after checking previous items or other troubles not mentioned in the previous
occurs, stop using the product and contact your distributor or contractor.
If abnormality (burnt odor, etc.) occurs, stop the operation and turn OFF the main power source
immediately.
If not, it may cause breakage of the product, an electric shock or a re.
Contact your distributor or contractor.
To Next Page
Loading...
