Hitachi RCI-3.0FSN3 - 1.4 PURPOSE OF THIS MANUAL; 1.5 WORKING RANGE; 2 REMOTE CONTROL OPERATION

TC-12001
3-33
4-WAY CASSETTE
P5414964-rev.1
15
(2) Remove the air lter.
Hold the lower side of the air inlet grille
keeping it inclined. Remove the hooks of air
lter from the air inlet grille and remove the
air lter.
Upper Part of Filter
Hook
Hook
Lower Part of Filter
Air Filter
A
ir Inlet Grille
(3) Clean the air lter.
v
Vacuum the dust by a cleaner, or wash the air
lter by water or neutral detergent.
v
Dry the air lter in the shade.
(4) Attach the air lter.
After the air lter is dried, attach correctly to
the air inlet grille.
(5) Close the air inlet grille.
(6) Reset the lter sign.
v
Press “
” (menu).
Select “Filter Sign Reset” from the menu and
press “OK”.
The conrmation screen will be displayed.
v
Select “Yes” by pressing “
” or “ ” and press
“OK”.
The indication of “FLTR” will be turned OFF
and the screen will return to the normal mode.
FLTR
OK
Reset filter sign?
Filter Sign Reset
Yes No
SEL. ENT. RTN.
Menu
Schedule Timer
Simple Timer
Function 3
Elevating Grille
01
/
03
Filter Sign Reset
15:10(Fri)
ENT. RTN.SEL.
OK
NOTE
• Do not use hot water more than 50
o
C.
The air lter may be deformed by heat.
• Do not dry the air lter by an open re, a dryer or
a heater. The air lter may be deformed.
NOTE
Be sure to attach the air lter.
If the indoor unit is operated without the air lter, it
may cause malfunction of the indoor unit.
NOTE
If the accumulated time of lter cleaning is not got
to setting time, the indication “ ” is turned ON
and “Setting Disabled” will be displayed.