4. DISASSEMBLY AND ASSEMBLY FOR COMPRESSOR AND MOTOR
5.0HP/6.0HP/6.5HP
Removal and Assembly of Fan Motor
Important: Before removing the fan, make sure the power is off.
Step Illustration Handling instruction
1. Unplug the motor
cables.
Use screwdriver to remove the
electric box cover and unplug the
motor cables in electric box.
2. Loosen the fan
and motor.
Use a offset spanner to loosen the
screws holding the fan cage to the
motor shaft. Remove outer housin
g
holding motor in place.
3. Remove the
diversion circle and
support bracket.
Use screwdriver to remove the
diversion circle and support
bracket.
4. Replace the motor.
Remove the fan cage from the
motor shaft. Remove the motor from
the air inlet and replace with new
motor. Be sure to tighten the
cages
onto the motor shafts.
5. Reassembly of the
unit.
Reassemble the unit in the
reverse order of disassembly and
test operation.
To Next Page
Loading...
