Display Panel
5
6
4
6
2
1
1
3
7
5
4
2
3
7
HCWA21NEWH
Wire Controller
Remote Controller
Identification of Parts
Remote Controller (Optional)
You can control the air-conditioner with the wired controller or remote controller.
It is used for power ON/OFF, setting the operation mode, temperature, fan speed and other functions.
There are different types of remote controllers that can be used.
Operation instructions will be further specified in remote controller's manual .
Please read it carefully before using this appliance and keep it for future reference.
The figures in this manual are based on the external view of a standard model.
Consequently, the shape may differ you have selected.for the air conditioner model
*
It can be set or canceled by professional after-sale staff.
4
1
Run indicator (Red)
It lights on during operation. It lights off during SLEEP mode.
2 Emergency switch
The filter clean indicator is displayed on the screen when this switch is pressed. The unit will stop
operation if you continue to press this button, if pressed for more than 5s, the unit will operate in
3 Timer indicator (Green)
It lights on when timer is in use. It lights off when timer completes.
4 Filter clean (Yellow)
It lights on when the filter should be cleaned.
5 Defrost indicator (Green)
It lights on during defrosting and it lights off when defrosting is complete.
6 Buzzer
It rings when the signal from remote controller is received.
7 Infrared receiver
Receives signal from the remote controller.
cooling mode.
Remote Controller
HCRA31NEWH
To Next Page
Loading...
