Hitachi RPC-6.0FSR User Manual

588 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

–

–

INSTALLATION &

OPERATION

MANUAL

INDOOR UNITS SYSTEM FREE

Ceiling Type

MODELS

RPC-(1.5-6.0)FSR

INSTALLATION AND OPERATION MANUAL

MANUAL DE INSTALACIÓN Y FUNCIONAMIENTO

INSTALLATIONS- UND BETRIEBSHANDBUCH

MANUEL D’INSTALLATION ET DE FONCTIONNEMENT

MANUALE D’INSTALLAZIONE E D’USOI

MANUAL DE INSTALAÇÃO E DE FUNCIONAMENTO

INSTALLATIONS- OG BETJENINGSVEJLEDNING

INSTALLATIE- EN BEDIENINGSHANDLEIDING

INSTALLATION- OCH DRIFTHANDBOK

ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ ΚΑΙ ΛΕΙΤΟΥΡΓΙΑΣ

EN

ES

DE

FR

IT

PT

DA

NL

SV

EL

BG

CS

ET

HU

LV

LT

PL

RO

RU

РЪКОВОДСТВО ЗА ИНСТАЛИРАНЕ И ЕКСПЛОАТАЦИЯ

NÁVOD K MONTÁŽI A OBSLUZE

PAIGALDUS- JA KASUTUSJUHEND

TELEPÍTÉSI ÉS ÜZEMELTETÉSI ÚTMUTATÓ

UZSTĀDĪŠANAS UN EKSPLUATĀCIJAS ROKASGRĀMATA

MONTAVIMO IR NAUDOJIMO VADOVĄ

INSTRUKCJA MONTAŻU I OBSŁUGI

MANUAL DE INSTALARE SI OPERARE

ИНСТРУКЦИЯ ПО МОНТАЖУ И ЭКСПЛУАТАЦИИ

PMML0551 rev.4 - 07/2023 - A10762310A

SCAN QR

Installation and

Operation

manual

https://docs.hitachiaircon.com/

RPC-FSR

Other manuals for Hitachi RPC-6.0FSR

Technical Catalogue88 pages

Operation Manual28 pages

Installation & Maintenance Manual52 pages

Questions and Answers:

M
Michele WadeAug 12, 2025
Why does my Hitachi RPC-6.0FSR Air Conditioner operation stop?
- R
  Ronald HawkinsAug 12, 2025
  The Hitachi Air Conditioner might stop operating due to several reasons: * The micro-computer may be activated to protect the device from electromagnetic waves. In this case, restart the operation. * If “Motion Sensor ON” is enabled on the wired controller, the unit might stop if the sensor detects absence for a prolonged period, especially if set to “If absent: OFF”. This will stop all indoor units connected to the same wired controller. * Following a power failure, the unit should restart automatically if the failure lasts less than 2 seconds. Otherwise, manually restart the operation.
K
Kenneth BoltonAug 16, 2025
Why is the temperature irregular in my Hitachi RPC-6.0FSR Air Conditioner?
- J
  John ScottAug 16, 2025
  The air flow volume and temperature may be irregular due to structural factors like the size of the air outlet and the location of the heat exchanger.
M
Michael HarrisAug 19, 2025
What to do if my Hitachi Air Conditioner has an odor?
- A
  Alicia ReeseAug 20, 2025
  If you notice an odor coming from your Hitachi Air Conditioner, it might be due to smells like cigarette smoke or other room odors that have been absorbed inside the unit. To resolve this: * Ventilate the room well while running the unit in fan mode. * Clean the air filter, air outlet, and air inlet grille.
B
Brandon ContrerasAug 25, 2025
Why is there mist coming from my Hitachi RPC-6.0FSR indoor unit?
- B
  Briana NguyenAug 25, 2025
  Mist coming from your Hitachi Air Conditioner's indoor unit can occur for several reasons: * **In restaurants or kitchens:** Oil attached to the fins might decrease heat exchange efficiency. * **During dry operation:** The air outlet temperature might become too low; try changing the operation mode. * **During cooling operation in humid environments:** The air outlet temperature might be too low; raise the set temperature and the air flow volume. * **During FrostWash:** Frost may form on the fins of the heat exchanger.
A
aguilarcameronAug 27, 2025
Why is my Hitachi RPC-6.0FSR making sounds?
- M
  martinmichaelAug 28, 2025
  Your Hitachi Air Conditioner may produce various sounds during operation: 1. A grate sound when starting or stopping is normal; it's due to components rubbing as resin parts expand and contract with temperature changes. 2. The sound of water flowing or burbling during operation is the refrigerant flowing or the drain-up mechanism draining water, especially noticeable when starting or stopping the compressor (for about 3 minutes). 3. A growling sound may occur temporarily after changing the air flow volume because the fan motor makes a temporary sound when the fan speed changes. 4. Crackling sounds or the sound of frost melting during FrostWash are normal, caused by the heat exchanger fins freezing and thawing and the extension and contraction of resin parts due to temperature changes.
M
Matthew GilbertAug 31, 2025
Why is there dew condensation on my Hitachi RPC-6.0FSR indoor unit?
- T
  Tiffany AndersonAug 31, 2025
  Dew condensation on your Hitachi Air Conditioner's indoor unit can occur due to: * Operating the unit in a humid place (relative humidity around 80%) for an extended period. * During or after FrostWash, especially in humid (around 80% relative humidity) and high-temperature environments (above 30°C).
A
alexwoodsSep 4, 2025
Why is there white steam from my Hitachi RPC-6.0FSR Air Conditioner indoor unit?
- E
  elizabethtoddSep 4, 2025
  White steam from the Hitachi Air Conditioner's indoor unit might appear during the defrosting operation when the unit is in heating mode.
R
Rodney LutzSep 7, 2025
Why is there white smoke from my Hitachi RPC-6.0FSR indoor unit?
- R
  Rachael OrtizSep 7, 2025
  White smoke from the Hitachi Air Conditioner's indoor unit may occur at the beginning of the heating season. This can happen when dust attached to the heat exchanger dries out.

Hitachi RPC-6.0FSR Specifications

General

Brand	Hitachi
Model	RPC-6.0FSR
Category	Air Conditioner
Language	English

Summary

SAFETY

Symbols Used

Explanation of symbols used to highlight important safety information.

Additional Safety Information

Specific safety instructions related to dangers and cautions during operation.

Danger and Caution Warnings

Critical safety instructions for potential dangers and cautions during operation.

Installation Precautions

BEFORE OPERATION

MAINTENANCE

Daily Maintenance Procedures

TROUBLESHOOTING

Common Phenomena and Causes

Lists common operational issues and their potential causes and actions.

Contacting the Distributor

Guidance on when and how to contact the distributor for assistance.

Main Alarm Codes

Reference table of alarm codes and their corresponding abnormalities.

INDOOR UNIT INSTALLATION

Initial Check

Key checks before installation, including clearance and mounting strength.

Position of Suspension Bolts

Details on positioning suspension bolts for unit mounting.

Installation of Suspension Bolts

Mounting Indoor Unit

Instructions for attaching the indoor unit to the suspension bolts.

REFRIGERANT PIPING WORK

Piping Connection Procedures

Detailed steps for connecting refrigerant pipes, including flaring and tightening.

DRAIN PIPING

Connecting the Drain Hose

Connecting Drain Piping

ELECTRICAL WIRING

Safety Precautions for Wiring

Warnings and precautions for performing electrical wiring work safely.

General Check Before Wiring

Electrical Wiring Capacity

Guidelines for selecting appropriate wire sizes based on current and voltage.

Wiring Connection Positions

Diagrams showing wiring connection points for indoor units and electrical boxes.

Wiring Connection Details

Wiring Connection

Dip Switch Setting

TEST RUN

Before Test Run Checks

Verification steps to ensure correct installation before performing the test run.

Starting the Test Run

Procedures for conducting the test run after installation completion.

Related product manuals

Hitachi RPC-6.0FSNE

Hitachi RPC-6.0FSN3

Hitachi RPC-6.0FSN2E

Hitachi RPC-6.0FSN3E

Hitachi RPC-4.0FSR

Preview: Hitachi RPC-1.5FSN3

Hitachi RPC-1.5FSN3

Hitachi RPC-2.0FSNE

Hitachi RPC-4.0FSN2E

Hitachi RPC-4.0FSN3E

Preview: Hitachi RPC-3.0FSN3E

Hitachi RPC-3.0FSN3E

Hitachi RPC-2.5FSN2E

Hitachi RPC-2.0FSN2E