Provide a downward slope to
flow drain water smoothly
Use Adhesive Tape
Fig. 6.3 Connection of Drain Piping
13
(4) Provide a vinyl chloride pipe, VP20.
(5) Connect a drain piping as shown in Fig. 6.3.
Use adhesive tape for connecting the drain pipe.
(6) Pour water into the drain pan and check to
ensure that water can flow smoothly.
Do not connect the drain pipes with
sanitary or sewage or any other
When installing the pipe, do not tie the
drain pipe and refrigerant pipe together.
Pay attention to the thickness of the
insulation when the left side piping is
too thick, piping
drainage pipe.
performed. If it is
can not be installed in the unit.
l
Tighten screws according to the
following
torque.
M3.5: 1.2 N m
M5: 2.0 to 2.4 N m
.
.
To Next Page
Loading...