To Next PageTo Next PageHow to open the lid of my Hitachi SF-P130XWV?
If your Hitachi Washer lid won't open, it could be because the lid lock indicator is lit, meaning the lid is locked. Turn on the power and wait for the lock to release. If there was a power outage or the power was turned off while the lid lock indicator was lit, turn the power back on and wait for the lock to release.
Why does my Hitachi Washer show error C1?
If your Hitachi Washer displays error code C1, it could be due to several reasons. First, verify that the tap is fully open. Also, inspect the water supply inlet filter for any accumulated dirt. Check if the water pipes or the water supply hose are frozen. Finally, ensure that there have been no disruptions to the water supply.
What to do if my Hitachi SF-P130XWV Washer shows error C2?
If your Hitachi Washer displays error code C2, it indicates a drainage issue. Inspect the drain hose to ensure it is not blocked, twisted, crushed, or frozen. Also, verify that the drain hose is correctly connected and that the drain outlet is not positioned too high.
How to fix error C4 on a Hitachi Washer?
If your Hitachi Washer displays error code C4, it means the laundry is not balanced correctly. Try these steps: 1. Redistribute the laundry evenly inside the tub. 2. Balance the load by removing some bulky items like cotton blankets or jeans, or large items like sheets. 3. Check if the washing machine is wobbling or if the floor is slanted and adjust the leveling. 4. Remove any non-washable items from the tub.
Why my Hitachi SF-P130XWV Washer does not operate?
If your Hitachi Washer is not operating, ensure the power plug is correctly inserted into the power outlet. Check for any power outages in your area. Also, verify if the Delay Timer has been activated.
What does error C0 mean on my Hitachi SF-P130XWV?
If your Hitachi Washer displays error code C0, it indicates that the laundry load is too large. Reduce the amount of laundry according to the instructions on pages 15-17.
What does error Ch mean on Hitachi Washer?
If your Hitachi Washer displays error code Ch, it could be due to several reasons. First, check the amount of powder detergent used, as too much may cause this error. Also, inspect the drain hose to ensure it is not clogged and is correctly installed.
What to do if my Hitachi Washer shows error code C3?
If your Hitachi Washer displays error code C3, it indicates that the lid is open. Close the lid to resolve this issue.
What does error code C8 mean on a Hitachi SF-P130XWV?
If your Hitachi Washer displays error code C8, make sure that the lid is completely closed. Also, check the lock for any foreign objects that may be obstructing it.
What does error code C9 mean on a Hitachi Washer?
If your Hitachi Washer displays error code C9, there may be foreign objects in the lock. Turn the power off and then on again, and wait a little while.
General| Type | Top Load Washer |
|---|---|
| Capacity | 13 kg |
| Spin Speed | 700 RPM |
| Water Consumption | 150 L |
| Energy Rating | 4 Stars |
