To Next PageTo Next Page
Need help?Do you have a question about the Hitachi ST-150NV and is the answer not in the manual?
General| Hopper Capacity | 500 notes |
|---|---|
| Stacker Capacity | 200 notes |
| Reject Pocket Capacity | 50 notes |
| Display | LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Counting Speed | 1, 500 notes/min |
| Counterfeit Detection | UV, MG, IR |
Guidelines for safe product usage and precautions to prevent harm or damage.
Warnings and advice regarding proper product installation to avoid accidents and hazards.
Safety instructions for connecting and using the product's power supply to prevent fire or shock.
Guidance on safe product operation and handling to prevent accidents and damage.
Safety advisories related to product maintenance and troubleshooting for abnormal conditions.
Items included in the product package.
Optional accessories and features for the machine.
Identification of parts and features visible from the front of the machine.
Identification of ports and controls located on the rear of the machine.
Explanation of the various indicators and information displayed on the screen.
Procedure for changing the local currency displayed and used by the machine.
How to select between different operating modes like MIX, SP, and SG.
Instructions for enabling or disabling counterfeit detection sensors.
Methods to review the results of the counting process, including barcode and save options.
How to print counting results and check reasons for rejected notes.
Descriptions of ATM, FIT, and VALUE modes for note sorting and counting.
Using the Grand Total function to settle accounts before clearing.
Accumulating total counting results, including manual addition.
Using the verify function to count notes without adding to previous totals.
How to set batch numbers for counting operations.
Setting batch limits for rejected notes, requires Pincode.
Selecting pre-defined batch numbers for counting.
Configuring auto mode for separating Unfit and Suspect notes.
Selecting Suspect, Unfit, Suspect or Unfit, and Suspect and Unfit options.
Counting mixed currencies together.
Counting notes of installed currencies together.
Counting only the first inserted currency and rejecting others.
Sending the first inserted currency and denomination to the Stacker Pocket.
Setting and adjusting fitness and counterfeit levels.
Choosing specific fitness parameters like Tape X, Hole, Soil, etc.
Setting and adjusting counterfeit detection levels for various sensors.
Selecting specific counterfeit detection items like UV, MG, IR.
Displays product series, serial number, and software version.
Configuring individual sensors like Motor, Counter, TDS, UV, MG, CIS.
Choosing the display language for the machine interface.
Setting the current date and time for the machine.
Adjusting the sound output and volume levels.
Configuring printer output options like device, baud rate, paper size.
Changing the machine's Pincode for security.
Saving and loading configuration settings using the bookmark feature.
Setting up network parameters like IP address, subnet mask, and server IP.
A comprehensive list of error codes and their corresponding descriptions.
Diagrams illustrating the sensor modules and their components.
Instructions for routine cleaning of machine sensors and parts.
