Why does my Hitachi Fitness Equipment show a communication error?
A communication error in your Hitachi Fitness Equipment indicates problems with communication between the boards. To resolve this, inspect the harness connections between the boards and the software operation.
How to fix a skew error on Hitachi Fitness Equipment?
A skew error on your Hitachi Fitness Equipment means the note is inserted on the skew. To fix it: 1. Check that both sides of the GAP are the same. 2. Ensure all covers are closed properly.
Why does my Hitachi Fitness Equipment show a conditional error?
A conditional error on your Hitachi Fitness Equipment means that the note is good but the stacked condition is not matched.
Guidelines for safe operation to prevent injury and damage.
Specific safety instructions for installing the product to prevent accidents.
Instructions for safe connection and use of the power supply cord and plug.
Instructions for safe handling of the product to prevent damage or injury.
Safety warnings and procedures related to product maintenance and repair.
Introduction to various counting and sorting modes available.
Details on using the ATM mode for sorting good condition notes.
Details on using the FIT mode for sorting banknotes by fitness condition.
Introduction to Operation Mode 2 and its key operations.
How to select the local currency for counting operations.
How to select different operation modes within Operation Mode 2.
How to view the total counting results on the display.
List of error codes, their meanings, and potential causes.
Instructions for cleaning various parts of the machine.
Guidelines for safe operation to prevent injury and damage.
Specific safety instructions for installing the product to prevent accidents.
Instructions for safe connection and use of the power supply cord and plug.
Instructions for safe handling of the product to prevent damage or injury.
Safety warnings and procedures related to product maintenance and repair.
Introduction to various counting and sorting modes available.
Details on using the ATM mode for sorting good condition notes.
Details on using the FIT mode for sorting banknotes by fitness condition.
Introduction to Operation Mode 2 and its key operations.
How to select the local currency for counting operations.
How to select different operation modes within Operation Mode 2.
How to view the total counting results on the display.
List of error codes, their meanings, and potential causes.
Instructions for cleaning various parts of the machine.
General| Display | LCD |
|---|---|
| Power Supply | AC 100-240V, 50/60Hz |
| Weight | 6.5 kg |
| Stacker Capacity | 200 bills |
| Counterfeit Detection | UV, MG, IR |
| Connectivity | USB, RS-232 |
To Next Page
