Hitachi TB-1 User Manual

14
Preparations for Use
Mounting the Wireless Adapter and USB Memory Devices
Connect the tablet’s wireless adapter to a USB TYPE A port on your projector.
When you wish to save an image that has been drawn, a USB memory device must also
be connected to a USB TYPE A port of the projector.
If the projector only has one USB TYPE A port, use a USB hub to connect both devices.
NOTE
Some USB memory devices and/or USB hubs may not operate properly.•
Connecting the Computer and Projector with a USB Cable
In order to use the tablet in place of the computer’s mouse, connect a USB TYPE B port of
the projector with a USB port (Type A) of the computer with a USB cable.
Then select “MOUSE” for the projector’s “USB TYPE B” function setting.
NOTE
For information on the projector’s “USB TYPE B” settings, refer to the user’s manual •
of the projector.
USB
(A)
USB TYPE B
USB TYPE A
Wireless
adapter
USB memory
device
Tablet
Projector
USB hub
Computer
Fig. 4 Example of connections
01TB-1Eng.indd14
01TB-1Eng.indd14
2011/11/1114:57:53
2011/11/1114:57:53

Hitachi TB-1 Specifications

General

Brand	Hitachi
Model	TB-1
Category	Tablet
Language	English