To Next PageTo Next PageWhat to do if my Hitachi UT32-MH700A remote control does not work?
If your Hitachi Monitor's remote control isn't working, ensure the batteries are correctly installed and not exhausted; replace them if necessary. Also, remove any obstructions from in front of the sensor window on the unit. Check if the buttons on the control panel are working.
What to do if there is no picture but normal sound on my Hitachi UT32-MH700A?
If you have normal sound but no picture on your Hitachi Monitor, check the 'Brightness' and 'Contrast' levels in the 'Picture Menu'. Also, verify the connections to external equipment and the 'RGB Input' setting in the 'Setup' menu for RGB or Composite input.
How to fix no picture and no sound on Hitachi Monitor?
If your Hitachi Monitor has no picture and no sound, check the Indicating lamp status (Off, Red, Green, or Orange). Ensure the power cord and other cables are correctly connected. Verify that the unit and any external equipment are powered on. Confirm the correct mode is selected, and check if the unit is in 'Standby mode' or 'Power Save mode'. Adjust the values in the 'Picture menu' and 'Audio menu'.
What to do if my Hitachi UT32-MH700A Monitor displays multiple images but the sound is normal?
If your Hitachi Monitor shows multiple images with normal sound, check the connections to external equipment.
Why is there no sync signal on my Hitachi UT32-MH700A?
If your Hitachi Monitor displays 'No Sync. Signal', verify that the cable is correctly and firmly connected. Ensure that the power of any external equipment is ON. Check that the input selection matches the connection terminal. Also, check if the PC is in Power Save mode.
What to do if my Hitachi Monitor has no picture and the indicating lamp is off?
If your Hitachi Monitor shows no picture and the Indicating lamp is off, ensure the power cord is securely plugged into the socket and the power switch on the unit is turned on.
Why does my Hitachi UT32-MH700A show 'Invalid Scan Freq.'?
If your Hitachi Monitor displays 'Invalid Scan Freq.', verify that the cable is correctly and firmly connected and that the input signal is compatible with the monitor's specifications.
What to do if my Hitachi Monitor has normal picture but no sound?
If your Hitachi Monitor has a normal picture but no sound, check the volume level. Ensure the mute button hasn't been pressed. Check the connections to external equipment. If the Input Signal Screen Display shows 'DVI', connect the PC (RGB)/DVI Analog Audio Input terminal. Finally, verify that 'Speakers' in the 'Audio' menu is set to 'On'.
What to do if my Hitachi UT32-MH700A Monitor has no picture and the Indicating lamp is orange?
If your Hitachi Monitor displays no picture and the Indicating lamp is orange, ensure all cables to external equipment are correctly and securely connected. Check if the external equipment is powered on. Verify that the HDMI mode has been selected correctly and that the PC is not in Power Save mode.
What to do if my Hitachi UT32-MH700A has no color but normal sound?
If your Hitachi Monitor displays no color but the sound is normal, check the connections to external equipment. Also, check the 'Color System' setting in Composite input.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| Display Type | LCD |
| Contrast Ratio | 1200:1 |
| Viewing Angle | 178° (H) / 178° (V) |
| Speakers | Yes, 10W x 2 |
| Input Ports | HDMI, Composite, Component |
