Do you have a question about the Hitachi V-212 and is the answer not in the manual?
Type | Analog Oscilloscope |
---|---|
Bandwidth | 20 MHz |
Channels | 2 |
Input Sensitivity | 5 mV/div to 5 V/div |
Trigger Source | CH1, CH2, Line, EXT |
Input Coupling | AC, DC, GND |
Max Input Voltage | 400 V (DC+AC peak) |
CRT Size | 6 inches |
Time Base | 0.2 μs/div to 0.5 s/div |
Trigger Modes | Auto, Normal |
Input Impedance | 1 MΩ // 25 pF |
CRT Type | Rectangular |
Power Source | 100, 120, 220, 240 VAC; 50/60 Hz |
Weight | 7.5 kg |