Procedure
1. On your management console PC or laptop, open a web browser and enter the following IP address:
192.168.0.16
2. Enter the default user name maintenance and the default password raid-maintenance, and then press the
Enter key to log in to Hitachi Storage Advisor Embedded.
If the login window does not appear, check whether the browser is configured to allow pop-ups. If pop-ups are
allowed, make sure the management console IP address is set to 192.168.0.18 and the subnet mask is set to
25.255.255.0. If the IP address and subnet mask are correct and pop-ups are allowed, but the login window does
not appear, contact customer support.
3. In the top-right corner, click the gear icon, and then select User Administration.
4. Click Support Personnel Group.
5. On the Users tab, select the maintenance user check box if it is not already selected, and then click Edit.
https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/0…
Updated: Mon, 01 Feb 2021 07:07:26 GMT
Powered by
14
To Next Page
Loading...
Need help?
General