Hitachi VSP E590 User Manual

Hitachi Virtual Storage Platform E590 and
E790
93-04-01
Hardware Reference Guide
This document provides information about the system hardware components and the mechanical and
environmental specifications for the VSP E590 and VSP E790 storage systems.
MK-97HM85050-01
February 2021

Hitachi VSP E590 Specifications

General

Form Factor	2U, 4U
Drive Types	SAS HDD
RAID Support	RAID 5, RAID 6
Host Interface	Fibre Channel, iSCSI
Data Reduction	Deduplication, Compression
Operating System Support	Windows, Linux, VMware, IBM AIX, HP-UX, Oracle Solaris
Power Supply	Dual, Hot-swappable
Weight	4U: 60 kg

Summary

Introduction

Key Features

Highlights the system's high performance, reliability, and scalability aspects.

Hardware Overview

Controller Chassis

Describes the components, LEDs, and switches of the controller chassis.

Specifications

Environmental Specifications

Covers temperature, humidity, vibration, impact, seismic, altitude, atmosphere, and noise.

Electrical Specifications

Details AC power input, voltage, frequency, and current requirements.

Physical Specifications

Lists weight, heat output, power consumption, and airflow specifications for components.

Turning Storage System Power On and Off

Powering On the Storage System

Step-by-step procedure for powering on the storage system.

Powering Off the Storage System

Step-by-step procedure for safely powering off the storage system.

Site Preparation

Site Preparation Checklist

Site Planning