Need help?Do you have a question about the Hitachi VSP N800 and is the answer not in the manual?
General| Model | VSP N800 |
|---|---|
| Connectivity | Fibre Channel, iSCSI, FCoE |
| Form Factor | Rack-mountable |
| Installed Devices / Modules Qty | Varies by configuration |
| High Availability | Yes |
| Drive Types Supported | SSD |
| RAID Levels Supported | RAID 1, RAID 5, RAID 6, RAID 10 |
| Power Supply | Redundant |
| Supported Protocols | FC, iSCSI, FCoE |
| Data Reduction Features | Deduplication, Compression |
| Scalability | Yes |
| Management Software | Hitachi Command Suite |
| Cooling | Redundant cooling fans |
Identifies target readers for the document.
Mentions the included UEFI Development Kit and its source.
Advises checking release notes for updates and corrections.
Explains typographic conventions used in the document.
Defines units for calculating physical storage capacity.
Defines units for calculating logical storage capacity.
Provides resources for technical support and community forums.
Instructions on how to provide feedback on the document.
Describes the system configuration for block-level storage access.
Explains configurations supporting file and block access.
Details the VSP N800 system architecture and interfaces.
Lists key features and specifications of the VSP N800.
Describes the system's pay-as-you-grow scalability.
Lists supported drive trays and drive counts.
Details maximum drive trays and drives per controller.
Introduces the CBLH controller and its status indicators.
Defines the LEDs on the CBLH controller's front panel.
Details the LEDs on the front panel when the bezel is removed.
Defines the LEDs on the rear panel of the CBLH controller.
Describes LEDs and connectors on the power supply unit.
Explains interfaces and LEDs for system management.
Details LEDs and connectors for various front-end interface boards.
Lists port assignments for the PCIe module.
Describes LEDs and connectors for the LAN blade.
Details LEDs and connectors for back-end modules.
Describes the physical specifications of SFF drive trays.
Defines the LEDs on the SFF drive tray front panel.
Details LEDs on the SFF drive tray front panel without bezel.
Describes LEDs and connectors on the SFF drive tray rear panel.
Details LEDs and connectors for AC power supplies in SFF/LFF trays.
Details LEDs and connectors for DC power supplies in SFF trays.
Describes the physical specifications of LFF drive trays.
Defines the LEDs on the LFF drive tray front panel.
Details LEDs on the LFF drive tray front panel without bezel.
Describes LEDs and connectors on the LFF drive tray rear panel.
Details LEDs and connectors for DC power supplies in SFF trays.
Describes the physical specifications of the Flash Module Drive tray.
Defines the LEDs on the FMD drive tray front panel.
Details LEDs on the FMD drive tray front panel without bezel.
Describes LEDs and connectors on the FMD drive tray rear panel.
Describes the physical specifications of the DB60 drive tray.
Defines the LEDs on the dense intermix drive tray front panel.
Details the LEDs on the dense intermix drive tray.
Describes LEDs and connectors on the dense intermix drive tray rear panel.
Defines the LEDs on the front panel bezel of the host port expansion chassis.
Details the PCIe switchboard and its status LED.
Describes the ALM LED for the expansion chassis fan.
Details LEDs for the PCIe cable connector.
Describes LEDs and connectors for the power supply.
Details the ports and status LEDs for the NAS module.
Provides guidelines for storing the storage system.
Outlines the procedure to safely power off the storage system.
Discusses battery lifetime, treatment, and replacement period.
Provides instructions for removing SAS cables.
Details the mechanical specs of the controller chassis.
Details the mechanical specs of various drive trays.
Details the mechanical specs of the NAS module.
Lists dimensions for different drive types.
Lists data capacities for various drive types.
Lists rotational speeds for different drive types.
Details maximum drive counts and spare drives.
Lists battery specifications related to intake temperature.
Details interface types, data transfer speeds, and port counts.
Details RAID levels and volume/group limits.
Discusses memory components and data assurance.
Lists dimensions for different chassis types.
Lists the mass of different system components.
Lists the required height (in U) for components.
Details cache capacity and backup methods.
Specifies insulation withstand voltage and resistance.
Covers input voltage, frequency, current, heat, and power consumption.
Details operating, non-operating, and transport temperature ranges.
Details operating, non-operating, and transport humidity levels.
Details vibration limits for operating, non-operating, and transport.
Details vibration impact levels in m/s².
Details operating and non-operating altitude limits.
Provides guidelines for atmospheric conditions.
Details noise levels for operating and non-operating states.
Provides guidelines for noise levels, especially fire suppression.
Lists standards applicable to iSCSI configuration and ports.
Details supported iSCSI target functions.
Details cable specifications for iSCSI copper interfaces.
Lists standards applicable to iSCSI configuration.
Details iSCSI ports, connection methods, and transfer speeds.
Discusses battery lifetime, treatment, and replacement period.
Lists cables required for storage system installation.
Details Fibre Channel connections and cable requirements.
Details cable specifications for iSCSI optical interfaces.
Provides guidelines for organizing and protecting cables.
Lists minimum bend radius values for different cable types.
Offers guidelines to protect cables from damage.
Provides guidelines for cabling NAS modules and similar.
Advises on cable routing for proper airflow.
Guides on designing cable infrastructure for future work.
Details components and types of power cables.
Describes types of AC connections and their country standards.
Provides guidelines for using power cables with storage systems.
Discusses the use of three-phase power for racks.
Offers solutions for managing cable congestion.
Provides default and available addresses for Fibre Channel ports.
Outlines requirements for installing in non-Hitachi racks.
Lists rail kit information for V2 racks.
Lists rack accessory information for VSP G series.
Provides guidelines for mounting DB60 trays in third-party racks.
Details country-specific certifications and product markings.
Explains proper disposal of electrical and electronic equipment.
Details recycling of nickel-metal hydride batteries.
To Next Page