FMD front panel without bezel
Number Item Description
1, 2 ACT LED Green: Normal operation.
Blink: Drive is being
accessed.
Slow blink indicates the FMD
is in the process of startup.
When powered, the LED
blinks for about two to five
minutes until the startup
processing is complete.
ALM LED Red: Drive stopped due to a
failure and can be replaced.
Note: ACT indicator is only
printed on some types of
FMDs.
3 POWER, READY, and
LOCATE LEDs
Green: Drive tray is powered
on.
Green: Drive tray is
operational.
FMD front panel without bezel
Chapter 3: Drive trays
VSP N800 Hardware Reference Guide 38
To Next Page
Loading...
