Do you have a question about the Hitachi VSP F350 and is the answer not in the manual?
Model | VSP F350 |
---|---|
Power Supply | Redundant Power Supplies |
Drive Types Supported | SSD |
RAID Levels Supported | RAID 1, RAID 5, RAID 6, RAID 10 |
Controller Type | Dual Controller |
Network Protocols Supported | iSCSI, FC, FCoE |
Host Interface | FC, iSCSI |
Data Reduction | Deduplication, Compression |
Operating Temperature | 10°C to 35°C |
Weight | Approximately 40 kg |
Maximum Host Ports | 16 |
Explains the LEDs on the CBL controller front panel, including their status indications.
Describes the LEDs on the CBL controller front panel when the bezel is removed.
Details the LEDs located on the rear panel of the CBL controller.
Explains the LEDs and connectors of the CBL controller's power supply units.
Describes ports and LEDs for host, network, and drive tray connections.
Details optical iSCSI board LEDs and connectors.
Details copper iSCSI board LEDs and connectors.
Explains LEDs and connectors for 4-port Fibre Channel boards.
Details LEDs and connectors for 2-port Fibre Channel boards.
Describes LEDs and connectors for back-end modules.
Describes LEDs and features on the SFF drive tray with a front panel bezel.
Details LEDs and features on the SFF drive tray without a bezel.
Explains the rear panel components and LEDs of the SFF drive tray.
Describes LEDs and connectors for AC power supply units in drive trays.
Details LEDs and features on the FMD drive tray with a front panel bezel.
Explains LEDs and features on the FMD drive tray without a bezel.
Describes the rear panel components and LEDs of the FMD drive tray.
Lists hardware specifications for the VSP Fx00 Service Processor (SVP).
Describes the LEDs, reset button, and power button on the SVP front panel.
Details the ports and connections on the rear panel of the SVP.
Outlines the procedure for safely powering down the storage system.
Details host interface types, data transfer speeds, and number of ports.