Item Description
1 Copper iSCSI ports (require Ethernet LAN cables with RJ-45 connectors)
2 Optical iSCSI ports (require ber cables)
2. Connect your Gigabit Ethernet network switch to the NIC or HBA card in each host
computer or server.
Step 8: Register your storage system with Hitachi Vantara
Support
If you have not already registered for access to Hitachi Support Connect, do so now.
Otherwise, you will not be able to download and install Hi-Track Remote Monitoring
system, and you will encounter delays in getting your storage system running and
supported.
Before you begin
■
If you do not yet have a Support Connect account, register on Support Connect. For
details, click here.
Procedure
1. Locate the product serial number (labeled MFG. NO.) on the rear of the controller.
You will need this number to register your storage system.
Step 8: Register your storage system with Hitachi Vantara Support
Installing your storage system
Storage system installation (without SVP) 30
To Next Page
Loading...
