Table 9-115 SSB codes returned by raidcom unlock resource
raidcom unlock resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E10 2200 Cannot unlock because it is locked in another
session.
Table 9-116 SSB codes returned by raidcom modify clpr
raidcom modify clpr
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
CMDRJE Executing 2E00 002A The specified LDEV is not subject to processing.
CMDRJE Executing 2E00 0101 The parity group number or the external volume
group number is not in the effective range.
CMDRJE Executing 2E00 0102 The specified group type is not correct.
CMDRJE Executing 2E00 0107 The combined parity group cannot be set across
multiple CLPRs.
CMDRJE Executing 2E00 1300 The item cannot be migrated to another CLPR
because of either reason below.
• The specified parity group or external volume
group has an LUSE volume.
• The specified volume is an LUSE volume.
CMDRJE Executing 2E00 7000 The specified CLPR ID is invalid.
CMDRJE Executing 2E11 810A Abnormal cache status.
CMDRJE Executing 2E13 0101 The CLPR cannot be migrated because the
specified parity group or the external volume group
includes the pool volume that is used in the pool
for Thin Image or Copy-on-Write Snapshot.
CMDRJE Executing 2E20 0000 LDEV is not installed.
CMDRJE Executing 2E20 0100 There is no parity group.
CMDRJE Executing 2E20 4100 There is no external volume group.
CMDRJE Executing 2E20 7001 The specified CLPR is not installed.
CMDRJE Executing 2E30 0005 CLPR cannot be transferred by either one of the
following two reasons.
• Cache Residency Manager is set for the
specified volume.
• The specified parity group includes the
volumes for which Cache Residency Manager
are set.
9-162
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
