raidcom add spm_group
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B9D4 B9DC SPM cannot be operated without specifying the
host group because the specified WWN, SPM group
to which the SPM name belongs, or the specified
SPM group is associated with the host group.
CMDRJE Executing B9D4 B9DD The specified SPM group already exists. The
specified SPM group cannot be registered because
it is not associated with the host group.
Table 9-118 SSB codes returned by raidcom delete spm_group
raidcom delete spm_group
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing B980 B901 The command was rejected because the specified
port is for NAS Platform (System LU).
CMDRJE Executing B9D4 B9D0 The command cannot be executed due to one of
the following reasons:
• Server Priority Manager is being used by
Storage Navigator or Device Manager -
Storage Navigator. Delete all settings of
Server Priority Manager using Storage
Navigator or Device Manager - Storage
Navigator.
• Server Priority Manager information for the
port WWN already exists in the system. Delete
Server Priority Manager information from
Performance Monitor.
CMDRJE Executing B9D4 B9D2 The specified WWN or nickname does not exist.
CMDRJE Executing B9D4 B9D4 Server Priority Manager program product is not
installed.
CMDRJE Executing B9D4 D9DA The operation cannot be performed because it is
locked in another session.
CMDRJE Executing B9D4 D9DC SPM cannot be operated without specifying the
host group because the specified WWN, SPM group
to which the SPM name belongs, or the specified
SPM group is associated with the host group.
9-164
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
