Hitachi YUTAKI S80 RWH-6.0VNFE - 8.5 WIZARD START-UP CONFIGURATION

8.5 WIZARD START-UP CONFIGURATION
Once the design and installation of the system has been carried out, please set the controller following the wizard indication.
After starting-up the system for the rst time, the controller remains in a “Connecting” state, waiting for the indoor unit to send the
following parameters:
• Operation mode: Heating only or heating and cooling
• Model type: YUTAKI S, S COMBI, S80 or M.
This waiting state takes 25 seconds roughly:
After this “Connecting” state is nished, the LCD wizard makes the following questions:
CODE Description Default Value Range Steps Units Application
Notes
Controller Conguration S SC S80 M
Current
language
Select the language
of the controller
English
PC-ARFHE PC-ARFHE-01 PC-ARFHE-02
English
Spanish
French
Italian
German
tbc tbc - - ○ ○ ○ ○ -
- Adjust Date and Time - - - - ○ ○ ○ ○ -
Assistant
type
Select the
conguration method
Conguration
Assistant
Conguration Assistant
Advanced Conguration
- - ○ ○ ○ ○ -
If the selected Assistant type is “Conguration Assistant” it starts the Assistant questions, if “Advanced Conguration” is selected it
jumps to the detailed list of parameters that can be congured.
UNIT CONTROLLER
PMML0335A rev.1 - 04/2016
118