What causes Abnormality of picking up circuit for protection (Outdoor unit) in Hitachi Air Conditioner?
If your Hitachi Air Conditioner displays 'Abnormality of picking up circuit for protection (Outdoor unit)', inspect indoor unit PCB and wiring. The cause can be a failure of indoor unit PCB, incorrect wiring, or connection to PCB in the indoor unit.
What to do if Hitachi YUTAKI S80 shows abnormal transmission between outdoor and indoor units?
If your Hitachi Air Conditioner shows 'Abnormal transmission between outdoor and indoor units', check the wiring, terminals, and PCB for faults. This issue can be caused by incorrect wiring, loose terminals, PCB failure, a tripped fuse, or the power supply being OFF.
Why does my Hitachi YUTAKI S80 activate safety device from excessively high discharge pressure?
If your Hitachi Air Conditioner activates the safety device due to excessively high discharge pressure, inspect the heat exchanger and refrigerant conditions. This activation can be caused by overload (obstruction of HEX, short circuit), a mixture of inert gas, or excessive refrigerant.
What causes suction pressure decrease prevention to activate in my Hitachi YUTAKI S80 Air Conditioner?
Activation of suction pressure decrease prevention in your Hitachi Air Conditioner can be caused by a shortage or leakage of refrigerant, piping clogging, a close-locked expansion valve, or a locked fan motor.
What causes unit over-temperature limit protection in my Hitachi YUTAKI S80?
Unit over-temperature limit protection in your Hitachi Air Conditioner is activated if the water supply temperature is 5ºC more than the maximum water circuit temperature for 20 seconds.
What to do if Hitachi YUTAKI S80 shows Transistor module protection activation?
Inspect the transistor module conditions.
What does Decrease in discharge gas superheat mean for Hitachi YUTAKI S80?
If your Hitachi Air Conditioner displays 'Decrease in discharge gas superheat', check refrigerant charge and inspect related components. Possible causes are excessive refrigerant charge, failure of thermistor, incorrect wiring, incorrect piping connection, or expansion valve locking at opened position (disconnected connector).
How to solve RF Communication failure on Hitachi YUTAKI S80 Air Conditioner?
If your Hitachi Air Conditioner shows 'RF Communication failure', check the RF communication setup. This issue occurs when there is no communication for 1 hour with one or two RF receivers which are bound to the RF-Bridge.
What causes inverter fin temperature thermistor abnormality in Hitachi Air Conditioner?
Inverter fin temperature thermistor abnormality in your Hitachi Air Conditioner can be caused by a loose, disconnected, broken or short-circuited connector.
How to fix Incorrect PCB Setting in Hitachi Air Conditioner?
If your Hitachi Air Conditioner shows 'Incorrect PCB Setting', correct the DSW settings. This issue is caused by a wrong DSW setting in the case of Co041.
General| Refrigerant | R32 |
|---|---|
| Type | Air-to-Water Heat Pump |
| Operating Temperature Range (Heating) | -20°C to 35°C |
| Operating Temperature Range (Cooling) | 10°C to 46°C |
| Sound Power Level | Data varies significantly depending on the specific indoor and outdoor unit models. Please refer to the specific model's datasheet. |
| Noise Level (Indoor Unit) | Data varies significantly depending on the specific indoor unit model. Please refer to the specific model's datasheet. |
| Noise Level (Outdoor Unit) | Data varies significantly depending on the specific outdoor unit model. Please refer to the specific model's datasheet. |
| Power Supply | 50Hz |
| Dimensions (Indoor Unit) | Data varies significantly depending on the specific indoor unit model. Please refer to the specific model's datasheet. |
| Dimensions (Outdoor Unit) | Data varies significantly depending on the specific outdoor unit model. Please refer to the specific model's datasheet. |
| Weight (Indoor Unit) | Data varies significantly depending on the specific indoor unit model. Please refer to the specific model's datasheet. |
| Weight (Outdoor Unit) | Data varies significantly depending on the specific outdoor unit model. Please refer to the specific model's datasheet. |
Crucial safety warnings and instructions for correct installation and operation.
Highlights critical instructions for manual adherence, specifications, and system integrity.
Details Energy-related Product (ERP) performance data for space heaters, efficiency, and energy classes.
Illustrates refrigerant and hydraulic circuits for YUTAKI S and S COMBI split systems.
Outlines safety measures and concentration limits for refrigerant leaks.
Lists indoor unit alarm codes, their origin, details of abnormality, and main troubleshooting factors.
Details outdoor unit alarm codes, categories, types of abnormality, and their main causes.
To Next Page
